Planked House Number Shutter

When we moved into our house, there was this huge house number that hung right next to the front door that was just plain ugly and was one of the first things we ripped of our house… but then we didn’t have a house number other than the one on our sidewalk. Spencer bought some numbers a couple years ago but they were lost in the pit of our desk drawer… oops! I wanted to do something fun that I could display our house number and I thought a planked house number shutter would be perfect!

House Number Shutters (13) copy (600x800)

I started by buying a couple of 1x4x8 at Home Depot and cut them down using my Ryobi miter saw. You will need (4) four pieces cut at 30” and (2) two at 14.5”.

House Number Shutters (1) copy (600x800)

I decided that I wanted my cross pieces to be about two inches from the top and the bottom. I used wood glue and glued the back of each piece…

House Number Shutters (2) (600x800)

… then I used my Ryobi Airstrike Nail Gun and nailed the cross piece into each of the longer pieces. I nailed it in at least twice on each board – sometimes I felt I needed one more nail!

House Number Shutters (3) copy (600x800)

And then the building was done!!

House Number Shutters (4) copy (600x800)

At first I decided that I wanted to stain it cherry, so I did but then I changed my mind and decided to paint it instead! I used DecoArt Chalk Paint in Relic.

House Number Shutters (6) copy (600x800)

When the paint was dry I used my cornercat and sanded it down a bit to rough it up.

House Number Shutters (7) copy (600x800)

I then used the cream wax to protect the whole piece. Since I knew it was going outside, I used a couple coats to protect it against the elements.

House Number Shutters (8) copy (600x800)

I used the house numbers I bought at home depot…

House Number Shutters (9) copy (600x800)

… and screwed them on.

House Number Shutters (10) copy (600x800)

I flipped my shutter over and screwed in two screws a few inches apart. Make sure you do this over the cross board so you don’t screw through the front of your shutter.

House Number Shutters (11) copy (600x800)

I wrapped wire inbetween the screws and then I tightened the screws up. Now it’s ready to hang up.

House Number Shutters (12) copy (600x800)

Last fall my husband drilled some anchors into our brick so I simply hung it up on the anchor that was already by our front door.

House Number Shutters (16) copy (600x800)

I love it!! It is rustic and darling perfect for the space!

House Number Shutters (18) copy (600x800)

If you missed some of our more recent projects you can check them out here!

Faux Drawer Console Table (44) copy Toy Truck Book Ends (63) copy Easy One Hour Rustic Blanket Ladder
Faux Drawer Console TableToy Truck BookendsBlanket Ladder

You can also follow us here on our social media as I am always showing sneak peeks at the projects we are working on!

Follow Us On Facebook Follow Us On Twitter Follow Our Feed Follow Us On Instagram Follow Us On Pinterest

Have a great day!!
signature-copy_thumb.jpg

The following two tabs change content below.
Hey there! We are Spencer and Amanda, a DIY husband and Wife team, sharing projects we build and create together for our home. Since buying our home in 2007 we have had the saying that Spencer builds it and makes it work and Amanda makes it look good. We hope you will stick around because we always have projects in the works!

Latest posts by Spencer and Amanda (see all)

Comments

  1. Hello! I’ve been following your blog for some time now and finally got the courage to go
    ahead and give you a shout out from Porter Tx!
    Just wanted to mention keep up the excellent job!
    tephabond recently posted…tephabondMy Profile

Trackbacks

  1. visit the site

    Planked House Number Shutter – The Contractor Chronicles

Speak Your Mind

*

CommentLuv badge